Lillipad Pontoon Diving Board

Add some fun to your pontoon! Put a diving board on it with a heavy duty Lillipad Diving Board!
In stock

LilliPad Diving Boards provide an energy canceling diving board specifically designed for mounting on a boat. The diving board is designed so that downward forces generated by a person jumping on the end of the board are "canceled" by equal and opposite forces within its framework. Results in spring-action for the jumper and a gentle wave-action for the remaining boaters.

LilliPad Diving Boards are designed for use by children and adults up to a maximum weight of 250 pounds. The diving board is designed with a pin that can be adjusted to strengthen the spring for heavier or lighter users. Designed with heavy wall aluminum extrusion, stainless steel hardware and urethane spring components, corrosion and component failure is absolutely minimal. In addition, LilliPad Diving Boards offer traction materials and an adjustable stabilizer rail for safe jumping as well as a quick release pin to lower the diving board while it is not in use.

LilliPad Diving Boards are designed with a quick release pin which allows the board to drop down along the side of the boat while not in use. You can easily stow your Lillipad Diving Board by simply unscrewing the three eye bolts that secure it to the boat. The apparatus then separates into two sections (Ladder & Base/Board) which can easily be stowed under a seat section. In addition, all permanent mounting hardware is located under the boat resulting in a flooring surface free of any obstructions

Recommeded For:

Boats where accessing the underside fo the floor is not possible, or where frame memebers prevent the proper placement of the under floor plates Fiberglass boats with integrated swim platforms, Houseboat Decks, Cruiser Decks, Sailboat Decks, Yachts.

Click Here for Installation Tutorial >>

More Information
Required Water Depth 10' (3 M)
Jump Surface N/A
Size N/A
Warranty N/A
Riders N/A
Rider Weight N/A
Details Needs Minimum 3/4" thickness of Marine Grade Plywood * Needs Minimum 3/4" Solid Fiberglass Flooring
Product Weight N/A
Included The surface mount kit consists of three stainless steel plates designed with a matching footprint of the diving board frame and latter, nine 6mmx40mm stainless steel screws and three 10mm x 40mm stainless steel eye bolts. This kit is designed for use on b
Weight 50.0000
Write Your Own Review
You're reviewing:Lillipad Pontoon Diving Board
Your Rating